DENSO anti-corrosion tape DENSOLEN®-R20 HT 100 mm wit

DENSO's DENSOLEN® butyl rubber tapes and mastics are used corrosion prevention and repair work. DENSOLEN® tapes are easy to apply and require no special tools. They are also self-amalgamating, allowing the bonded layers to form a water- and oxygen-resistant protective coating. Thanks to DENSO's continued commitment to innovation and sustainability, all DENSOLEN® Tapes are H2-ready, making them ideal for the future transition to hydrogen energy.

Application

DENSOLEN®-R20 HT is used as a mechanical protection tape and is applied in combination with DENSOLEN® 3-layer polymer tapes. The tape can be used for pipes subject to extreme mechanical loads. DENSOLEN®-R20 HT is a component of various tape systems, including DENSOLEN®-ET100/-R20 HT for temperatures up to +100 °C and the systems DENSOLEN®-AS39 P/-R20 HT, DENSOLEN®-AS40 Plus/-R20 HT and DENSOLEN®-AS50/-R20 HT with stress class C 50 according to EN 12068.

Product Features

This is a coextruded 2-layer plastic tape made of stabilized polyethylene carrier material with butyl rubber adhesive on one side. The butyl rubber adhesive on DENSOLEN®-R20 HT completely fuses with the outer butyl rubber layer of the DENSOLEN® 3-layer tapes. In addition, DENSOLEN®-R20 HT also exhibits good UV stability. DENSOLEN®-R20 HT is cold applied and can be used in combination with factory coatings of PE, PP, FBE, PU, CTE and bitumen. The tape is suitable for operating temperatures from -40 to +50 °C. The tape has a thickness of 0,5 mm, a width of 50 mm and a roll length of 30 m.