Viking Johnson flange adapter UltraGrip DN600 604,0-648,0 mm

Viking Johnson's UltraGrip Series is designed to provide a solution for joining non-dedicated pipes made of different materials. It features a gripping mechanism that provides maximum grip around the entire pipe circumference, resisting axial loading. As the internal pressure in the pipe increases, the gripping mechanism's ability to hold the end load increases. Additionally, the grippers are removable, allowing UltraGrip to be converted into a flexible, non-restraint product that allows for axial movement.

Application

The UltraGrip flange adaptor can be used on a wide range of pipe materials, including steel, PE, PVC, steel, cast iron and AC (AC restraint is not guaranteed), in accordance with EN 14525. The flange bore is according to EN1092 PN10/16. This flange adapter has a DN 600 flange on one side and has a restraint, wide range connection of DN 600 on the other side. The size range of this connection is minimum 604 mm to maximum 648 mm. In addition, this flange adapter has EPDM sealing material and is therefore suitable for drinking water up to PN 16.

Product Features

This flange adapter is made of ductile iron with a rilsan nylon 11 coating, which makes the UltraGrip flange adapter highly resistant to abrasion and damage from chemicals or corrosion. In addition, even damaged and corroded pipes can be completely sealed by the specially profiled gasket. For the UltraGrip side, a support liner is recommended when used on a PE pipe. Furthermore, within the entire size range of the UltraGrip coupling, an angular deflection of up to 4° is possible.