Article number H01-2112
The SR 100 is a reliable FDA and BGA approved silicone half mask made from one piece. It is easy to maintain and can be easily cleaned with soap and water or disinfectant wipes. The use of silicone helps to prevent allergic skin reactions.
Unlike synthetic rubber, silicone masks do not deform. Even when stored for long periods. This guarantees an optimal fit on the face at all times. The two exhalation valves ensure a very low exhalation resistance, so the wearer needs to exert less effort.
This mask can be used with Sundström filter cartridges for dust, mist, gases and vapours. Or with SR 307 adapter for blown-in compressed air.
The half mask is also available in sizes S and M. It has an adjustable textile headband and a pre-filter holder is included. For storage, use the handy SR 230 or SR 339 box.
Beard-bearing? Then take a look at our solutions with the SR 500 and SR 700 motor units with hoods and helmets.
| Article number | H01-2112 |
| Brand | Sundström |
| EAN | 7392203101213 |
| Order quantity per | 1 |
| Packing unit | 1 |
| Commodity code | 90200010 |
| Manufacturer country | SE |
| Type of mask | Half face mask |
| Standards | EN 140:1998 |
| Product weight | 179 g |
| Material | Silicone |
| Shelf life (years) | 10 |
| Colour | blue |
| Size | S/M |
| Maximum operating temperature | 55 °C |
| Maximum temperature storage | 40 °C |
| Minimum operating temperature | -10 °C |
| Minimum temperature storage | -20 °C |
| Nominal protection factor | 48 (GasX P3) |
| Nominal protection factor | 48 (P3) |
| Nominal protection factor | 50 (GasX) |
